SOURCE：JDS HELMET TIME：2015-2-14 11:57:59
1. Interior cleaning of helmet
When the helmet is used for a long time, its interior often has dirt accumulation, and produce peculiar smell. In this case, it should be cleaned. Use detergent as neutral and shampoo better. To avoid the smell of detergents, control the amount of use. Don't force too much inside the helmet. Otherwise, it will deform the buffer material and lose its buffering function.
After cleaning, wipe the water with a towel or paper towel and let it dry in the air. Do not use the hair dryer.
2, helmet surface maintenance
The helmet is more prone to soiling than the inside of the helmet, so wiping the surface is often done. In case of helmet has stains, the stains wipe with a damp cloth, and then use the wax or polish wax cleaning by rubbing the helmet, bright and clean. Helmets can also be used special brightener, the effect is better.
3, helmets, goggles maintenance
Since the mirror is a transparent device, be careful when wiping it. Cleaning goggles, add water to neutral cleaning agent, after the hand rub, and then tap water to clean thoroughly, and then use cotton soft cloth or paper towel wipe in the water. Finally on the outside surface by rubbing wax or antistatic agent, which can reduce dust adhesion and accelerate the flow of rainwater. The inside of the protective mirror should be painted against fog, which will play an important role in reducing the adhesion of fog at night. Of course, in rainy days, when you put down the mirror, you should also pay attention to the breathing method to reduce the fog on the mirror surface.